Concrete joint
Containment systems for the prevention of pollution, Secondary, tertiary and other measures for industrial and commercial premises (CIRIA C736), published by CIRIA in 2014, suggests that construction joints (in concrete, sometimes referred to as daywork joints) refer to: ‘A joint in concrete construction formed when placement of the concrete is interrupted for some reason. It may be the end of the day’s work, or it may be that some other work needs to be completed before resuming the placement. Results in a ‘surface’ between freshly placed and (partly) cured concrete.’
Crack control joints are: ‘A partially-formed contraction joint, which aims to ensure that when the concrete does crack, it cracks in a predictable manner at a precise location.
Contraction or shrinkage joints (in concrete): ‘Allows only for contraction or shrinkage of a slab or wall, as can be anticipated during the curing process.’
Expansion joints (in concrete): ‘Allow expansion and contraction of a concrete slab or wall without generating potentially damaging forces within the slab itself or the surrounding structures. Expansion joints are usually a complete ‘gap’ between adjacent bays, ie there is a definite break in the concrete and reinforcing steel that may be present. Where adjacent bays are ‘tied’ together by means of dowel bars, these dowels are sleeved in one of the bays to allow expansion to take place without generating stresses within the slab.’
A kicker joint is a: ‘Small upstand cast as part of a concrete base to allow the securing of wall shutters.'
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.
Minister quizzed, as responsibility transfers to MHCLG and BSR publishes new building control guidance.
UK environmental regulations reform 2025
Amid wider new approaches to ensure regulators and regulation support growth.
BSRIA Statutory Compliance Inspection Checklist
BG80/2025 now significantly updated to include requirements related to important changes in legislation.